BVMNY - PRO-TECH INT/EXT LTX GLOSS WHT, 5800
- MSDS: BVMNY
- Manufacturer: SINCLAIR PAINT CO
- Product Name: PRO-TECH INT/EXT LTX GLOSS WHT, 5800
- National Stock Number: 8010-00N052585
Product Identification
Product ID:PRO-TECH INT/EXT LTX GLOSS WHT, 5800
MSDS Date:04/30/1991
FSC:8010
NIIN:00N052585
MSDS Number: BVMNY
Responsible Party
LOS ANGELES, CA 90040
US
Emergency Phone: 213-664-2121
Info Phone: 213-888-8888
Preparer: J.G. PRINZ
Cage: 0U0K0
Contractor
Telephone: 213-888-8888
Cage: 0U0K0
Ingredients
0.2 @ 68F.
CAS: 57-55-6
RTECS: TY2000000
Fraction By Weight: 10%
OSHA PEL N/K
ACGIH TLV: N/K
2.02 LB/GAL (252
RTECS: 9999999VO
Fraction By Weight: SEE ING
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:ADVERSE HEALTH EFFECTS
FROM VAPORS OR SPRAY MISTS IN POORLY VENTILATED AREAS MAY INCLUDE
IRRITATION OF THE MUCOUS MEMBRANES OF THE NOSE, THROAT &
RESPIRATORY TRACT & SYMPTOMS OF HEADACHE & NAUSEA. EYES:INDIRECT
CONTACT MAY CAUSE IRRITATION. SKIN:PROLONGED & REPEATED CONTACT
W/PRODUCT MAY (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CAUSE IRRITATION. SKIN
ABSORPTION:REDNESS, DRYING OF SKIN OR OTHER SIGNS OF IRRITATION OR
CONTACT DERMATITIS. INGEST:CAN CAUSE GASTROINTESTINAL IRRITATION,
NAUSEA, VOMITING & DIARRHEA. CHRONI C:NONE KNOWN.
Medical Cond Aggravated by Exposure:NONE.
First Aid
First Aid:SKIN:CLEANSE THOROUGHLY W/SOAP & WATER. REMOVE ALL
CONTAMINATED CLOTHING. EYES:FLUSH IMMEDIATELY W/LARGE AMOUNTS OF
WATER FOR AT LEAST 15 MINUTES. TAKE TO MD FOR MEDICAL ATTENTION.
INHAL:REMOVE TO FRE SH AIR. INGEST:DRINK 1-8 GLASSES OF WATER TO
DILUTE. DO NOT INDUCE VOMITING. CONSULT MD OR POISON CONTROL CENTER
IMMEDIATELY. TREAT SYMPTOMATICALLY.
Fire Fighting
Lower Limits:2.6%
Upper Limits:12.6%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . THIS IS A WATER-BASED COATING. WILL NOT SUPPORT
COMBUSTION.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HIGH
TEMPERATURES MAY EXPLODE OR BURST DUE TO BUILD UP OF STEAM
PRESSURE.
Accidental Release
Spill Release Procedures:DIKE, CONTAIN OR ABSORB W/INERT MATERIAL
(I.E., SAND, VERMICULITE, ETC). TRANSFER TO CONTAINERS FOR RECOVERY
OR DISPOSAL. PREVENT RUNOFF INTO SEWERS, STREAMS OR OTHER BODIES OF
WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT EXPOSE TO EXTREMES IN
TEMPERATURES. AVOID EXPOSURE TO HIGH TEMPERATURES. DO NOT ALLOW TO
FREEZE.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
EXPOSURE TO LEVELS ABOVE TLV.
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED. IF TLV IS EXCEEDED USE
NIOSH/MSHA APPROVED ORGANIC VAPOR & MIST PROTECTION.
Ventilation:USE ADEQUATE MECHANICAL (GENERAL &/OR LOCAL) VENTILATION TO
MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:RESISTANT GLOVES SUCH AS POLYETHYLENE.
Eye Protection:ANSI APPVD CHEM WORK GOGG .
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING. FURNISH EYE WASH
STATIONS WHICH MEET ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS.
REMOVE & WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE ING
Vapor Density:LTR/AIR
Spec Gravity:1.2 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETELY
Appearance and Odor:TYPICAL FOR WATER BASED LATEX COATING.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON
DIOXIDE, CARBON MONOXIDE, ETC.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W ALL LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.